Serving Tulare, Visalia, Porterville, and YOU
Toll Free Ordering: 1-888-680-7665
Tulare, CA - 1161 N Cherry St - (559) 687-7665
Porterville, CA - 600 N Prospect St - (559) 784-7946

SeaKlear Metal Stain Control 1qt.

Be the first to review this product



Availability: Ships In 2-3 Business Days


+ Free Shipping

    Quantity Discounts:
  • Buy 2 for $24.65 each and save 24%
  • Buy 4 for $21.10 each and save 35%
  • Buy 6 for $20.30 each and save 37%
  • Buy 12 for $19.50 each and save 40%

SeaKlear Metal Stain Control 1qt.

More Views
  • SeaKlear Metal Stain Control 1qt. Label

Product Features

  • Effectively sequesters metal contaminants
  • Metal sequestrant
  • Helps prevent metal and mineral stains in new pools
  • Controls scale formation
  • Stronger formula than the leading competitor

Product Description Description

SeaKlear Metal Stain Control is a superior metal sequestering product that prevents metals from staining surfaces and helps remove metal contaminants. For existing metal stains, use SeaKlear Natural Stain Remover first before adding SeaKlear Metal Stain Control.

Manufacturer Description

SeaKlear Metal Stain Control is best used for metallic stain removal and prevention of hard water scaling. It sequesters (picks up) the maternal causing stains and scale and holds them in solution. If stains persist, they maybe old or of an organic nature. A complete cleaning of pool walls and surfaces may be necessary. To remove existing metal stains use SeaKlear Natural Stain Remover according to directions first. Follow by using SeaKlear Natural Clarifier at a rate of 2 ounces per 5,000 gallons. Once stains are removed SeaKlear Metal Stain Control can be used to prevent further staining. Dissolved metals and minerals (such as iron, Calcium, Manganese, and Magnesium) in pool water and corrosion of metal pool fittings will often cause staining and/or scaling. Do not let pH of pool water Fall below 7.0 or serious corrosion problems may result. For scale prevention it is also essential to maintain pH at 7.2 to 7.6, total alkalinity at 100 to 150 ppm, and calcium hardness at 100 to 275 ppm.



Read entire label and use strictly in accordance with precautionary statements and directions. For initial pool filling, adiust pH belween 7.2 to 7.6. For best results, use SeaKlear Metal Stain Control in the evening with pool pump and fitter operating overnight. Add 1 quart (32 oz.) per 10,000 gallons by premixing into plastic pail of water first. Dispense solution at deep end of pool. Cloudiness may develop with the appearance of white flakes. This is normal indicating SeaKlear Metal Stain Control is working and cloudiness will eventually disappear. For weekly maintenance dosage add 6 to 8 ounces per 10,000 gallons of water

HARD WATER NOTE: In areas with hard water where calcium hardness exceeds 300 ppm, it is advisable to double the dosages listed above, However, DO NOT increase the dosages more than double for one application.

Questions and Answers

There are no entries. Ask us a question.

Write Your Own Review

You're reviewing: SeaKlear Metal Stain Control 1qt.

How do you rate this product? *
SeaKlear Metal Stain Control 1qt. 1110011
$32.15 In stock